Install VirusScan.
- Click on the VirusScan 4.5.1 link below.
- If you are prompted with a File Download window (refer to Figure 4), Click on
the SAVE button.
VirusScan 4.5.1
Figure 4 - Click the SAVE button.
- Save the file, called virusscan_4.5.1sp1.msi, to your Desktop.
- Locate Virusscan_4.5.1sp1.msi on your Desktop and double-click
to open.
- If VirusScan 4.5 or earlier has previously been installed, you will
see a window titled Previous Version Detected (refer to
Figure 5).Remove the check next to Preserve Scan Settings and
click Next.

Figure 5 - Uncheck Preserve Settings
- If you do not already have McAfee installed you will see the following
Product Information screen (refer to Figure 6). Click Next.

Figure 6 - Product Information, Click Next
- The License Agreement will display (refer to Figure 7). Click on the radio
button labeled I agree to the terms of the License Agreement
and click Next.

Figure 7 - License Agreement, select I agree
- If you are prompted with a Modify option (refer to Figure
8), Click the Cancel button and skip to Step
3.

Figure 8 - Click Cancel if you see this message
- The Select Security Type window will display. Make sure the Use
Standard Security radio button is selected (refer to Figure 9).

Figure 9 - Set up McAfee, Select Standard Security
- The Setup Type window will appear. Select the radio button labeled Typical
Installation and click Next (refer to Figure
10).

Figure 10 - select Typical Installation
- Click Install (refer to Figure 11).

Figure 11 - Install
- The VirusScan Configuration window will appear. Un-Check the
Create an Emergency Disc and Run Default Scan options and click Next (refer
to Figure 12).

Figure 12 - Completing McAfee Virusscan setup
- The Update Virus Definition files window will appear. Select the Wait
and Run AutoUpdate Later radio button (refer to Figure 13)

Figure 13 - Wait and Run AutoUpdate Later
- If you are prompted to Start a VirusScan, Un-Check Start Virus
Scan (refer to Figure 14).

Figure 14 - Do Not Start VirusScan
- Click Finish.
Note: If you see the message You have chosen to move,
delete, or clean files… Click OK.