To add a printer from the BC network using Windows Vista:

1. Click Start, then select Control Panel.
2. Click Classic View in the left panel.
3. Double-click the Printers icon:
4. Click Add Printer (see Figure 1).
   
   Figure 1.
   
   
5. Select Add a network, wireless, or Bluetooth printer, then click Next (see Figure 2).
   
   Figure 2.
   
   
6. Select The printer that I want isn't listed, then click Next (see Figure 3).
   
   Figure 3.
   
   
7. Select Add a printer using a TCP/IP address or hostname, then click Next (see Figure 4).
   
   Figure 4.
   
   
8. In the Hostname or IP address box, enter the printer name followed by ".bc.edu", then click Next (see Figure 5).
   
   Figure 5.
   
   
9. Select the type of printer you are using, then click Next (see Figure 6).
   
   Figure 6.
   
   
10. On the "Type a printer name window," do the following (see Figure 7):
    • In the Printer name box, enter a name for your printer so you can identify it.
    • If you want to make this printer your default printer, check Set as the default printer.
    • Click Next.

Figure 7.



11. On the "You've successfully added" window, do the following (see Figure 8):
    • Click Print a test page.
      Note: If the test page did not print correctly, call your TC (  www.bc.edu/tc).
    • When you have successfully printed a test page, click Finish.
    
    Figure 8.