To Start:

1. Log in instructor computer as “student” with password “student”.
2. Press the screen twice on your right hand to start.
3. To project instructor computer,  Choose INSTRUCTOR PC on the top of the screen and then press Send to Projector at the bottom.
   
   NOTE: Press F7 key if the computer doesn’t project.
   
4. To project student laptops, choose STUDENT LAPTOPS next to INSTRUCTOR PC; press Projector Mode on the lower right hand to project or choose Preview Mode to preview from the monitor on your left; and then press the number of the computer you want.
   
   NOTE: Two computers from the same table cannot be previewed and sent to the projector at the same time.
   
5. Printing jobs default to the printer in the closet at the back of the room.

When You Leave:

1. Make a copy of the file you want to save from the computer. Everything saved on the local computers will be deleted on a timely basis.
2. Log out computers — please don’t shut down!
3. Press EXIT and then YES to turn off the projector.

SmartBoard Instructions:

1. Start the projector first in order to have SB working — follow the instruction above to log in to the computer and turn on the projector.
2. Open up SB application from the dock or go to Macintosh HD/Applications/SB.
3. The SB monitor is the one on your left, which should be automatically turned on now.
4. To switch functions of the pen attached to SB monitor, press buttons on the top.
5. If there's no signal on the SB monitor, please check the USB cable of SB at the back of the computer.